Sunday, June 12, 2016

JVC LT-Z32SX4B TV Service Menu

ADJUSTMENT PREPARATION of JVC LT-Z32SX4B, LT-Z32SX4B/A,
LT-Z32SX4B/S, LT-Z32SX4S/S

(1) There are 2 ways of adjusting this TV : One is with the REMOTE CONTROL UNIT and the other is the conventional method using adjustment parts and components.
(2) The adjustment using the REMOTE CONTROL UNIT is made on the basis of the initial setting values. The setting values which adjust the screen to the optimum condition can be different from the initial setting values.
(3) Make sure that connection is correctly made AC to AC power source.
(4) Turn on the power of the TV and measuring instruments for warning up for at least 30 minutes before starting adjustments.
(5) If the receive or input signal is not specified, use the most appropriate signal for adjustment.
(6) Never touch the parts (such as variable resistors, transformers and condensers) not shown in the adjustment items of this service adjustment.
JVC LT-Z32SX4B PRESET SETTING BEFORE ADJUSTMENTS
Unless otherwise specified in the adjustment items, preset the following functions with the REMOTE CONTROL UNIT.
MEASURING INSTRUMENT AND FIXTURES JVC LT-Z32SX4B
• Oscilloscope
• Signal generator (Pattern generator)
[PAL / 625i / 625p / 1125i(50Hz)]
• Remote control unit
JVC LT-Z32SX4B ADJUSTMENT ITEMS
VIDEO CIRCUIT
• 625i A-D OFFSET adjustment
• 1125i(50Hz) BRIGHTNESS adjustment
• 1125i(50Hz) A-D OFFSET adjustment
• SUB SCREEN A-D OFFSET adjustment
• WHITE BALANCE (HIGH LIGHT) adjustment
BASIC OPERATION OF SERVICE MODE
HOW TO ENTER THE SERVICE MODE
(1) Press [DISPLAY] key and [MUTING] key on the remote control unit simultaneously to enter the SERVICE MODE SCREEN.
(2) In the SERVICE MENU, press the [1] key to display.


TV Service Menu JVC LT-Z32SX4B


JVC LT-Z32SX4B TV Service Menu
Photo credit : aolanswers.com


JVC LT-Z32SX4B ADJUSTMENT MODE SCREEN.
NOTE:
• Before entering the SERVICE MODE, confirm that the setting of PIP/TV/DVD switch is at the "TV" side. If the switches have not been properly set, you cannot enter the SERVICE MODE.
• When a number key other than the [1] to [3] key is pressed in the SERVICE MODE SCREEN, the other relevant screen may be displayed.
This is not used in the adjustment procedure. Press the [MENU] key to return to the SERVICE MODE SCREEN.
HOW TO EXIT THE SERVICE MODE
Press the [MENU] key to exit the Service mode.

3leex Media Online

eleex You are reading JVC LT-Z32SX4B TV .
Bookmark the JVC LT-Z32SX4B TV Service Menu page to your favorite.

http://tvservicemode.eleex.com/2016/06/jvc-lt-z32sx4b-tv.html .
  • Blogger Comments
  • Facebook Comments

0 comments :

Post a Comment

Item Reviewed: JVC LT-Z32SX4B TV Rating: 4.3 Reviewed By: eLX Elcideed

Service mode

Sanyo

Samsung

Konka