Sunday, January 11, 2015

Hyundai and TCL M35/36 TV Service Menu

TCL M35 or 36 TV Service Mode 
Hyundai TV Chassis M53 or M36 TV Service Mode
Adjustment of Screen Voltage
Enter the Factory Mode;
Press [CAPS] key, then press [REVEAL] key in 3 seconds, “Picture One” will display on the screen*:
* Key P-, P+: Choose the Item
Use volume button to change the value, or Enter into the Submenu
To Choose the mode Picture press REVEAL button
Press OK button to save and quit from factory mode
Enter into Cutoff in “Picture Three”, press Channel down button to Cathode Current (G2 ) mode menu;
Press [PIC] button and then adjust Screen Voltage of FBT until the screen will become a horizontal line.

Service mode Hyundai / TCL M35/36 TV
Photo by www.labnol.org

TCL M35 or 36 TV Service Mode 
Hyundai TV Chassis M53 or M36 TV Service Mode
The code above use for Hyundai and TCL TV Chassis M53 or M36.
Before you entering TCL and Hyundai factory mode to change any value on the factory service mode, please write down all the original factory settings. tvservicemenu are not responsibility for any damage, data error and unwanted effect after using our service code and information on these page.
Original remote or universal remote control needed as a tools to program the factory mode (Recommended use the original remote control).
If the code above do not match to your television please browse another service code in sitemap page.

3leex Media Online

  • Blogger Comments
  • Facebook Comments

0 comments :

Post a Comment

Item Reviewed: Hyundai and TCL M35/36 TV Rating: 4.3 Reviewed By: eLX Elcideed

Service mode

Sanyo

Samsung

Konka